The USB-C standard brings a universal connector for notebooks and cell phones that eliminates the difficulty of finding the right side to connect and, in addition, gives more capacity to external devices.
Many devices have already adopted the new standard. However, some cables are not designed correctly and can damage your electronics when connecting with another type-A end.
To take advantage of technology in your devices, learn about some necessary precautions and prevent the device from being harmed by USB-C.
USB-C Cable Hazards
Hardware can be damaged by a bad USB Type-C cable easily. However, the big danger is with cables with a C-connector on one side and an older USB port on the other.
The reason for the problem lies in the incompatibility with the new specification. USB-C devices can support faster charging, but Type-A inputs (oldest and most used to this day) were never designed to deliver the amount of power the new cable requires.
For example, when connecting a cell phone with a USB-C port to a computer with a USB-A port, the bad cable will try to extract more energy, damaging the notebook or the PC port. However, if the cable is of good quality, it should prevent the smartphone from forcing older entries without harming any parts.
Beware Of Manufacturers
Many cables, especially cheaper ones, are not designed correctly and can cause this problem. However, there are still few devices with the standard, so the consequences are little known.
How To Find A Quality Cable
Before purchasing a cable with a USB Type-C connector on one end and an older USB connector on the other end, you should make sure that the device complies with the USB-C specification and will not damage any device.
A good place to start looking is the profile of Benson Leung, a Google employee who worked on the Chromebook Pixel and Pixel C hardware at Amazon. Leung analyzes the cables sold in several online stores and points out the advantages and disadvantages of each model.
Another option for finding quality cables is the USB-C Compliant website. The page lists devices already reviewed and recognized for the correct specifications.
USB Type-C 3.1 Standard Is Ready To Go Into Production
The new USB standard, Type-C, is now ready to go into production and promises transfers of up to 10 Gbps, according to a note released by the company Promoter Group. This speed is three times that of the current USB 3.0 and allows you to stream an entire movie in just one second. The model is compatible with USB 3.1 inputs and only achieves maximum performance when connected to ports of the genre.
According to the manufacturer, the cable will be available with a 100-watt charger at 20 volts, allowing you to charge larger gadgets such as notebooks and monitors. The connection also allows for smooth data transmission between gaming tablets and TVs.
The input of the new standard is similar to a micro USB Type-B cable, with the plug size being 8.4mm by 2.6mm. To use the wire in a regular USB port or other types of connectors, you will need to use one of the 18 pins and adapters that come with the product – and they support up to 10 thousand cycles.
The connection with notebooks and monitors may, in the future, even replace AC cables, which connect these machines to electrical energy. The great power of the USB Type-C cable is equivalent to its high data transfer capacity.
Conclusion
Hopefully, this is just a transitional issue, and these bad cables will disappear from the market as more people buy USB Type-C devices.
Technology will also not be an issue when all older devices with USB Type-A ports are no longer used. This, of course, can still take quite some time. Until then, follow the tips above and be very careful.
Also Read: The Giant Smartphone Camera Comparison